Skip to content

Lea Steiner

Industrial designer, Basel

I design lamps, furniture and small appliances for manufacturers, from the first drawing to the production tooling.

Practice
Since 2015
Own studio
Since 2019
In production
14 objects
Studio photograph of an aluminum desk lamp standing on the floor, its black cable trailing to the left, beside an ash chair with a perforated metal seat, on a pale gray backdrop.

Selected objects

Five of the fourteen objects in production, newest first. Each row opens its notes further down the page.

Pendel

Desk lamp for Ostrander Leuchten, 2023

A spring balanced task lamp in brushed aluminum. A knurled knob on the elbow joint holds the angle. One hex key services the whole lamp.

The Pendel desk lamp on its own: brushed aluminum double arms with exposed balance springs, a bell shaped shade turned toward the camera and a round base, on a pale gray backdrop.
Close-up of a hand pinching the knurled aluminum knob on a joint of the lamp arm, with a wing knob on the far side of the joint.
The knurled knob sets the joint friction by hand. The springs carry the arm and the knob holds the angle.

Specification

Dimensions
H 640 x W 180 x D 560 mm
Reach
Two arms of 380 mm, shade Ø 160 mm
Weight
2.4 kg
Materials
Brushed aluminum, steel springs, turned steel base
Light
E27 socket, LED bulb 8 W, warm white at 2,700 kelvin
Process
Shade metal spun from 0.8 mm sheet. Arms cut from flat aluminum bar. Knobs knurled on a lathe.
Finishes
Natural, graphite
Production
Ostrander Leuchten, Germany, since 2023

Further objects

Four more, all still made by the companies that commissioned them.

A stackable ash chair with a perforated metal seat, seen in three quarter view on a pale gray backdrop.
Lochblech Stacking chair2021, Brunnfeld MöbelAsh, perforated steelH 790 x W 470 x D 510 mmStacks eight high. The seat is pressed from one 2 mm perforated sheet and bolted to the ash frame without glue, so every part can be replaced.
A cylindrical matte white electric kettle with a pouring lip, an arched cork handle over the lid and a small black switch near the base, on a pale gray backdrop.
Sud Electric kettle2025, Casa FerrandiPainted steel, corkH 275 x Ø 130 mm, 1.5 lOne switch and no display. The cork handle stays cool and wears in with use. The lid lifts off whole for descaling.
A small light gray portable radio with rounded corners, a perforated speaker grille on the left and one large rotary dial on the right, seen from the front on a pale gray backdrop.
Welle Portable radio2022, Orsolin AudioABS, perforated steelH 140 x W 220 x D 70 mmFM and DAB+ on one dial: turn to tune, press to change band. The battery runs 30 hours and is held by two screws, not glue.
A round white wall clock without numerals, with twelve short black index lines and two thin black hands, hung on a pale gray wall.
Strich Wall clock2019, Werkstatt ImbodenPainted aluminum, steelØ 300 x D 45 mmThe first object from the studio. Twelve index lines, two hands and a silent sweep movement for bedrooms and reading rooms.

Practice

I studied industrial design, drew household appliances for a manufacturer in Aarau for four years and opened my studio in Basel in 2019. I take few projects at a time and stay with each one until it runs on the factory line.

Overhead view of a sheet of tracing paper with pencil line drawings of the kettle in front, side and top view, a steel ruler below, a mechanical pencil at the right and the dark edge of a straightedge in the upper left corner.
Every object starts as orthographic drawings in three views. Here, the Sud kettle.

Clients

  • Casa FerrandiBrescia, Italy
  • Ostrander LeuchtenStuttgart, Germany
  • Orsolin AudioLugano, Switzerland
  • Brunnfeld MöbelZurich, Switzerland
  • Werkstatt ImbodenBiel, Switzerland
  • Sälde HemGothenburg, Sweden
  • Feldberg Office SystemsFreiburg, Germany

Experience

  • 2019Studio Lea Steiner, Basel
  • 2015Product designer, Brandt Gerätebau, Aarau

Education

  • 2015MA in Industrial Design, University of Applied Arts
  • 2013BA in Product Design, School of Design and Craft

Awards

  • 2024Selection, Nordlicht Product Biennale, for Pendel
  • 2022Rheinknie Award for Objects, for Lochblech
  • 2020Mention, Dreiland Design Days, for Strich

Contact

lea@example.com

Studio

Klybeckstrasse 141

4057 Basel

Switzerland

New projects

Two manufacturer projects open for 2027. Send a brief, a timeline and the factory you work with.

Elsewhere

The SwissBuild this oneAll templates
Lea Steiner, The Swiss demo | Syforia