Skip to content
Ceramics

Slow hands,high fire.

Thomas Hale, studio potter. Wheel thrown stoneware and porcelain from a two kiln studio in the River Arts District of Asheville, North Carolina. Gas reduction to cone 10, electric to cone 6 and a wood firing twice a year.

  • Stoneware
  • Porcelain
  • Cone 6 to Cone 10
  • Asheville, North Carolina
Statement

Every pot spends a day in the kiln and another cooling before I know what it is. I have stopped trying to rush either one.

Thomas Hale, studio notes, 2026

Selected work

The shelf

Six recent pieces from the gas and electric kilns. Each one is thrown, trimmed and glazed in the studio, with glazes mixed from raw materials.

  • Tall stoneware bottle with an ovoid body and a narrow neck, glossy near black tenmoku breaking to rust at the shoulder ridge and the lip, bare clay at the foot, on a dark oak shelf
    01

    Ridgeline Bottle

    2025

    Tall bottle, stoneware, Cone 10

    Glaze: Tenmoku

    Thrown in two sections and joined at the shoulder. The tenmoku breaks to rust where it thins over the join ridge and the rolled lip.

  • Wide porcelain bowl on a narrow foot, its gray green celadon crackled all over and pooling greener in the well, a small window highlight in the glaze, on a dark oak shelf
    02

    Still Water Bowl

    2024

    Wide bowl, porcelain, Cone 6

    Glaze: Celadon

    Trimmed to a narrow foot so the celadon pools deep in the well. One of twelve serving bowls made for Pennywort Kitchen in West Asheville.

  • Round stoneware storage jar in creamy white shino flashing orange, gray carbon trapping across the shoulder and one thick copper red drip running down the center from the rim, bare toasted clay at the foot, on a dark oak shelf
    03

    Ember Jar

    2025

    Storage jar, stoneware, Cone 10

    Glaze: Shino

    Carbon trap shino with a single pour of copper red that runs from the rim. Shown in Long Cool at Wrenfield Gallery.

  • Ivory porcelain vase with a round full belly and a short flared neck in a soft satin glaze, spiral throwing lines showing through, on a dark oak shelf
    04

    Winter Vase

    2023

    Vase, porcelain, Cone 10

    Glaze: Clear satin

    Fired in reduction so the satin glaze stays soft and the throwing lines show through. Now in the collection of the Hollis Ridge Museum of Craft.

  • Straight sided stoneware tea bowl with an uneven rim, olive and amber wood ash glaze running down in glassy drips over bare iron speckled clay, on a dark oak shelf
    05

    Ash Tea Bowl

    2025

    Tea bowl, stoneware, Cone 6

    Glaze: Wood ash

    Glazed with ash from the studio woodstove, washed and sieved to 80 mesh. Made in a run of 30 for the Quiet Hour Tea Room in Black Mountain.

  • Round porcelain moon jar with a short collar and a seam ridge at the belly, its kaki glaze chocolate brown over the shoulder and persimmon rust below with dark oil spot flecks, a bare white foot, on a dark oak shelf
    06

    Moon Jar, Kaki

    2026

    Moon jar, porcelain, Cone 10

    Glaze: Kaki

    Two thrown bowls joined rim to rim, with the seam left visible at the belly. The iron saturate glaze turns persimmon in a slow cool.

Process

Inside one firing

The pyrometer log from a cone 10 reduction firing in the 40 cubic foot downdraft gas kiln, March 2026. Cone 10 was down at 12 hours 50 minutes.

0 °F600 °F1,200 °F1,800 °F2,400 °F0 h4 h8 h12 h16 h20 hCandleRampMeltSoakCoolCone 10Cone 6Cone 06
  1. 01

    Candling 250 °F

    Burners on low with the spy holes open, so the last water leaves the glaze before it can boil.

  2. 02

    Ramp 1,200 °F

    A steady climb of about 250 °F an hour once the ware is dry and the damper is set.

  3. 03

    Reduction and melt Cone 012

    Body reduction starts at cone 012, then the glaze melts through cone 06 and cone 6.

  4. 04

    Peak and soak Cone 10

    Cone 10 down and cone 11 starting to bend. A one hour soak lets the glaze heal over.

  5. 05

    Slow cool 700 °F

    Burners off and the damper closed. The kiln is near 700 °F when the log ends and gets unloaded the next afternoon.

Materials

Stoneware or porcelain

Two clay bodies stay on the shelf. The form decides which one I reach for, not the other way around.

Stoneware

A grogged stoneware with iron speckle, mixed to my recipe by a supplier in Marion. It holds a tall wall and comes out of reduction toasted wherever it is left bare.

Fires to
Cone 6 or Cone 10
Body
Toothy, grogged, iron speckle
Kiln
Gas reduction and wood
Best for
Jars, tea bowls, bottles

Porcelain

A cone 6 to 10 porcelain that throws soft and turns translucent below 3 mm. I keep it for thin walls, moon jars and pieces that need to hold light.

Fires to
Cone 6 or Cone 10
Body
Smooth, white, translucent when thin
Kiln
Electric oxidation and gas
Best for
Moon jars, vases, cups
Cone 6 and Cone 10 at a glance
DetailCone 6Cone 10
Peak2,232 °F2,345 °F
AtmosphereOxidationReduction
Cycle9 h14 h
GlazesCeladon, wood ashTenmoku, shino, kaki
Two clay streaked forearms in rolled dark sleeves: one hand inside a tall grogged stoneware cylinder, the other pressing the outside wall, on a blurred wheel head in a dark splash pan, with racks of pale bisque bowls soft behind
Pulling a stoneware cylinder at the wheel, with the week's bisqueware on the racks behind.
Studio

Thomas Hale

Studio potter, Asheville, North Carolina

I learned to throw in a community studio and spent three years as an assistant at Bracken Hill Pottery in Seagrove, where I learned to load a kiln by feel. After an MFA I opened my own studio in 2016.

Today I work from a converted tire shop in the River Arts District with a downdraft gas kiln and two electric kilns. Twice a year I fire the Crooked Pine anagama with five other potters: five days of stoking around the clock.

Practice
Since 2016
Kilns
Gas, electric and wood
Training
MFA, State University
Studio
Asheville, North Carolina
Recognition

Exhibitions and awards

Shows, residencies, collections and the years of training before the studio.

26Firings in 2025
4Solo shows
100%House glazes
  • 2025Juror's awardTallow Creek Clay Biennial, Knoxville, Tennessee
  • 2024Solo exhibition, Long CoolWrenfield Gallery, Asheville, North Carolina
  • 2023Permanent collectionHollis Ridge Museum of Craft, Greenville, South Carolina
  • 2019Artist residencyFernhollow Clay Center, Vermont
  • 2014 to 2016MFA in CeramicsState University
  • 2011 to 2014Studio assistantBracken Hill Pottery, Seagrove, North Carolina
Commissions

Reserve a place in the next firing.

I take on a few commissions each season, from single pieces to dinnerware for restaurants. Tell me what you have in mind and when you need it. Lead time is usually 10 to 14 weeks.

The KilnBuild this oneAll templates
Thomas Hale, The Kiln demo | Syforia